Extra Heavy-Duty Low-Profile Water Bladder 55L – DW55BLP – Potable TPU
Extra Heavy-Duty Low-Profile Water Bladder 55L – DW55BLP – Potable TPU
Extra Heavy-Duty Low-Profile Water Bladder 55L – DW55BLP – Potable TPU
  • Load image into Gallery viewer, Extra Heavy-Duty Low-Profile Water Bladder 55L – DW55BLP – Potable TPU
  • Load image into Gallery viewer, Extra Heavy-Duty Low-Profile Water Bladder 55L – DW55BLP – Potable TPU
  • Load image into Gallery viewer, Extra Heavy-Duty Low-Profile Water Bladder 55L – DW55BLP – Potable TPU

Extra Heavy-Duty Low-Profile Water Bladder 55L – DW55BLP – Potable TPU

$217.80
$217.80
Sold out

Tax included. Shipping calculated at checkout.

This is our NEW Outback Series 55 Litre Low-Profile (Pillow Type) Bladder. 

The 55 Litre Low-profile box tank is our second smallest 4×4 bladder designed to fit behind the driver and passenger seat in the rear foot well. This bladder is perfect for a couples long weekend away and those who need to transport water to their caravans at remote sites. The 55L bladder like its smaller brother comes with a 13mm inlet/outlet as well as a 13mm breather designed to be filled from a tap, reducing the chances of your vehicle getting wet.

Material :

1000GSM Potable TPU Material (Australian Made) – Light Blue Colour

Standards: ASNZ 4020

Please also note, with all our drinking water bladders, the taste is preferential and there are many factors that subject to taste. However, all our drinking water bladders are tested up to Australian Standards for plastics with use for human consumption. So, we can guarantee that there are no toxicity present.

 

Standard Fittings :

13mm inlet/ outlet and 13mm breather.

Capacity :

55L

Dimensions : 

(1500Lx350Wx160H)mm

Accessories :

2 hose kits with right angle fittings tap and cap, 1 self adhesive patch.

Weld Types :

25mm HF, Hot-air over lap welds.

Warranty :

2 year

 

12V water pump specifications (IF OPTIONED)

•Temperature: 0-60 degree Celsius
•Voltage: 12V DC
•Power: 80W
•Working Pressure: ~80PSI (0.55MPA)
•Max Pressure: ~115PSI (0.8MPA)
•Flow rate: 5.5L/min
•Size: 16.5 x 10 x 6cm (approx)
•Corrosion resistant.
•Rubber bracket can absorb vibration from the pump when working.
•Connector size fits 8-13mm inner diameter pipe.
•Auto turn on/off the motor when outlet on/off

Pump should be used in dry condition, cannot submerge into water.


12V HIGH FLOW water pump specifications (IF OPTIONED)

• Temperature: 0-100 degree Celsius
• Voltage: 12V DC
• Power: 30W
• Max Lift: 8m
• Max Pressure: ~12 PSI (0.8MPA)
• Flow rate: 13 L/min
• Corrosion resistant.
• Connector size fits 12.5mm inner diameter pipe.

• Transfer pump (requires power switch).

Pump should be used in dry condition, cannot submerge into water.


Back to 4x4 Accessories