Extra Heavy-Duty Low-Profile Water Bladder 40L – DW40BLP – Potable TPU

This is our NEW Outback Series 40 Litre Low-Profile (Pillow Type) Bladder.

The 40 Litre Low-profile tank is our smallest standard bladder we produce. It is designed for smaller weekend camping trips or afternoons at the beach where you may need a quick rinse before heading home.

The 40 litre portable water tank is designed to be filled using a hose connected to mains or gravity fed systems. This unique inlet and outlet system is designed to prevent the interior of your vehicle from getting wet.

The 40 Litre comes with a breather to allow the air to escape during filling however does not need to be used whilst in use.

Material :

1000GSM Potable TPU Material (Australian Made) – Light Blue Colour

Standards: ASNZ 4020

Standard Fittings :

13mm inlet/ outlet and 13mm breather.

Capacity :

40L

Dimensions : 

(670Lx380Wx160H)mm

Accessories :

2 hose kits with right angle fittings tap and cap, 1 self adhesive patch.

Weld Types :

25mm HF, Hot-air over lap welds.

Warranty :

2 year

12V water pump specifications (IF OPTIONED)

•Temperature: 0-60 degree Celsius
•Voltage: 12V DC
•Power: 80W
•Working Pressure: ~80PSI (0.55MPA)
•Max Pressure: ~115PSI (0.8MPA)
•Flow rate: 5.5L/min
•Size: 16.5 x 10 x 6cm (approx)
•Corrosion resistant.
•Rubber bracket can absorb vibration from the pump when working.
•Connector size fits 8-13mm inner diameter pipe.
•Auto turn on/off the motor when outlet on/off

Pump should be used in dry condition, cannot submerge into water.

12V HIGH FLOW water pump specifications (IF OPTIONED)

• Temperature: 0-100 degree Celsius
• Voltage: 12V DC
• Power: 30W
• Max Lift: 8m
• Max Pressure: ~12 PSI (0.8MPA)
• Flow rate: 13 L/min
• Corrosion resistant.
• Connector size fits 12.5mm inner diameter pipe.

• Transfer pump (requires power switch).

Pump should be used in dry condition, cannot submerge into water.