Extra Heavy-Duty Box Type Water Bladder 150L – DW150B – Potable TPU
Extra Heavy-Duty Box Type Water Bladder 150L – DW150B – Potable TPU
Extra Heavy-Duty Box Type Water Bladder 150L – DW150B – Potable TPU
Extra Heavy-Duty Box Type Water Bladder 150L – DW150B – Potable TPU
Extra Heavy-Duty Box Type Water Bladder 150L – DW150B – Potable TPU
  • Load image into Gallery viewer, Extra Heavy-Duty Box Type Water Bladder 150L – DW150B – Potable TPU
  • Load image into Gallery viewer, Extra Heavy-Duty Box Type Water Bladder 150L – DW150B – Potable TPU
  • Load image into Gallery viewer, Extra Heavy-Duty Box Type Water Bladder 150L – DW150B – Potable TPU
  • Load image into Gallery viewer, Extra Heavy-Duty Box Type Water Bladder 150L – DW150B – Potable TPU
  • Load image into Gallery viewer, Extra Heavy-Duty Box Type Water Bladder 150L – DW150B – Potable TPU

Extra Heavy-Duty Box Type Water Bladder 150L – DW150B – Potable TPU

$363.00
$363.00
Sold out

Tax included. Shipping calculated at checkout.

This is our NEW Outback Series 150 Litre Box Type Bladder.

The 150 litres bladder is the largest standard tank we produce to fit across the rear seat foot well. It is designed like the 150L to be filled a 13mm inlet/outlet hose it comes additionally with a 13mm breather.

Like the DW150B this model has great capacity to service both showers and drinking water at the same time. This model is great for transportation of larger volumes of water to base-camps.

This tank is the ultimate for 4×4 journeys across deserts and remote areas. The 150L can be rolled up to a fraction of the size of larger rigid water carriers.


Material :

1000GSM Potable TPU Material (Australian Made) – Light Blue Colour

Standards: ASNZ 4020

Please also note, with all our drinking water bladders, the taste is preferential and there are many factors that subject to taste. However, all our drinking water bladders are tested up to Australian Standards for plastics with use for human consumption. So, we can guarantee that there are no toxicity present.

 

Standard Fittings :

13mm inlet/ outlet and 13mm breather.

Capacity :

150L

Dimensions : 

(1450Lx475Wx250H)mm

Accessories :

2 hose kits with right angle fittings tap and cap, 1 self adhesive repair patch.

Weld Types :

25mm HF, Hot-air over lap welds.

Warranty :

2 year

 

12V water pump specifications (IF OPTIONED)

•Temperature: 0-60 degree Celsius
•Voltage: 12V DC
•Power: 80W
•Working Pressure: ~80PSI (0.55MPA)
•Max Pressure: ~115PSI (0.8MPA)
•Flow rate: 5.5L/min
•Size: 16.5 x 10 x 6cm (approx)
•Corrosion resistant.
•Rubber bracket can absorb vibration from the pump when working.
•Connector size fits 8-13mm inner diameter pipe.
•Auto turn on/off the motor when outlet on/off

Pump should be used in dry condition, cannot submerge into water.


12V HIGH FLOW water pump specifications (IF OPTIONED)

• Temperature: 0-100 degree Celsius
• Voltage: 12V DC
• Power: 30W
• Max Lift: 8m
• Max Pressure: ~12 PSI (0.8MPA)
• Flow rate: 13 L/min
• Corrosion resistant.
• Connector size fits 12.5mm inner diameter pipe.

• Transfer pump (requires power switch).

Pump should be used in dry condition, cannot submerge into water.


Back to 4x4 Accessories