Extra Heavy-Duty Box Type Water Bladder 100L – DW100B – Potable TPU
Extra Heavy-Duty Box Type Water Bladder 100L – DW100B – Potable TPU
Extra Heavy-Duty Box Type Water Bladder 100L – DW100B – Potable TPU
Extra Heavy-Duty Box Type Water Bladder 100L – DW100B – Potable TPU
Extra Heavy-Duty Box Type Water Bladder 100L – DW100B – Potable TPU
  • Load image into Gallery viewer, Extra Heavy-Duty Box Type Water Bladder 100L – DW100B – Potable TPU
  • Load image into Gallery viewer, Extra Heavy-Duty Box Type Water Bladder 100L – DW100B – Potable TPU
  • Load image into Gallery viewer, Extra Heavy-Duty Box Type Water Bladder 100L – DW100B – Potable TPU
  • Load image into Gallery viewer, Extra Heavy-Duty Box Type Water Bladder 100L – DW100B – Potable TPU
  • Load image into Gallery viewer, Extra Heavy-Duty Box Type Water Bladder 100L – DW100B – Potable TPU

Extra Heavy-Duty Box Type Water Bladder 100L – DW100B – Potable TPU

$352.00
$352.00
Sold out

Tax included. Shipping calculated at checkout.

The 100 Litre is the first of our box style bladders. This means that we weld a wall between a top bottom panel. These models are designed to be supported behind the drivers and passengers seats in the rear foot well by the seats. The 100 L bladder is perfect for medium size 4×4’s and those who wish to transport water to camp sites.

The 100 L is great for outback camping because it comes with a 1 inch inlet enabling it to be filled in remote locations by bucket or other methods as opposed to via mains tap.

Material :

1000GSM Potable TPU Material (Australian Made) – Light Blue Colour

Standards: ASNZ 4020

Please also note, with all our drinking water bladders, the taste is preferential and there are many factors that subject to taste. However, all our drinking water bladders are tested up to Australian Standards for plastics with use for human consumption. So, we can guarantee that there are no toxicity present.

 

Standard Fittings :

25mm Inlet / Breather and 13mm Outlet.

Capacity :

100L

Dimensions : 

(1350Lx300Wx250H)mm

Accessories :

1 hose kit with tap, cap and 1 self adhesive repair patch.

Weld Types :

25mm HF, Hot-air over lap welds.

Warranty :

2 year

 

12V water pump specifications (IF OPTIONED)

•Temperature: 0-60 degree Celsius
•Voltage: 12V DC
•Power: 80W
•Working Pressure: ~80PSI (0.55MPA)
•Max Pressure: ~115PSI (0.8MPA)
•Flow rate: 5.5L/min
•Size: 16.5 x 10 x 6cm (approx)
•Corrosion resistant.
•Rubber bracket can absorb vibration from the pump when working.
•Connector size fits 8-13mm inner diameter pipe.
•Auto turn on/off the motor when outlet on/off

Pump should be used in dry condition, cannot submerge into water.


12V HIGH FLOW water pump specifications (IF OPTIONED)

• Temperature: 0-100 degree Celsius
• Voltage: 12V DC
• Power: 30W
• Max Lift: 8m
• Max Pressure: ~12 PSI (0.8MPA)
• Flow rate: 13 L/min
• Corrosion resistant.
• Connector size fits 12.5mm inner diameter pipe.

• Transfer pump (requires power switch).

Pump should be used in dry condition, cannot submerge into water.


Back to 4x4 Accessories